PriorityStart! 24-Volt ProMax
[P/N PSI-24V-PROMAX]
24-Volt ProMax
DON'T LET HEAVY EQUIPMENT FAIL!
Get started with PriorityStart! 24-Volt
The 24-Volt version of the PriorityStart! is specifically designed for any 24-Volt battery, or 12-Volt dual batteries wired in "Series" (that is, from positive on battery 1 to negative on battery 2 -- see instructions below). The 24-Volt system works and installs just like the 12-Volt ProMax and features the same benefits! However, the disconnect threshold is factory set at 23.5 volts.
The 24-Volt application is most often seen in farming, military and many international vehicles found outside of the United States.
Dual Battery Instructions for Series (24V) Setup
Important Note: The majority of dual battery setups are found to be in "Parallel", not "Series". Parallel setup occurs when the batteries are chained together from Positive to Positive. NOT Positive to Negative. Parallel setups remain 12-Volt systems. For instruction on that, see our downloads section. Using the wrong unit for the wrong application will damage your unit and void the warranty. Please contact us if any questions on this. Additionally, this setup would require the 12-Volt ProMax.
